Jan 13, 2019 · What’s the best way to test the VE injection pump to verify fuel pressure output to the injectors?? I’m going through the entire fuel system started with the tank & working my way forward …

Jul 20, 2025 · Look for any pinched, frayed, or disconnected wires, especially those tied into the lift pump circuit. A common issue is a wire getting tugged loose or chafed during the starter removal.

Dec 4, 2024 · Ground .125 off the AFC foot, using the fender washer in the AFC, 60 psi fuel supply via 973-1 Comp Cams spring in lift pump, Overflow valve shimmed, WVO conversion, Water Injection

Oct 13, 2007 · any one did it on a dodge?i want to put the winch on back.i was thinking, somehow tee the power steering lines and use quick couplers to change from winch or power steering.but it has …

Mar 22, 2015 · I have a 91 dodge cummins. On the back of the pump there is a spot to turn up or turn down pump. It's like a flat head screw on top of a nut almost. What one do I turn?

May 20, 2011 · Honestly even with a stock truck the dodge lift pump is not up to the task at hand. You need a good fuel pressure gauge and a good aftermarket pump. The best bang for the buck is the …

Jul 4, 2009 · The vacuum pump has gone and I have read in the 911 forum on what the repair is going to cost and what the part numbers are. My comment / question is, "Is this very common?" I have …

May 10, 2010 · think about an inline pump and filter system. prefilter/water separator first before pump and 2 micron after the pump. the stock 7 micron does not protect your expensive injectors and engine.

May 17, 2012 · Hey everyone I am about to replace the pump on my 95 motor and am needing help. I understand most everything other than setting the motor and installing the timing pin in the pump …

Jul 31, 2009 · Hey Fellas, I have a '98 3/4 ton ext. cab 4wd 12v Cummins with 217,000 on it and have found out by a "cummins specialist" that the lift pump is bad and that the "fuel pre-heater" looks to be …